Protective Clothing & Safety Equipment | PPE Gear

Firefighter Gear Bag - Red Medium

Made with heavy-duty nylon and equipped with heavy-duty zipper closure. Bag dimensions = 550mm x 350mm x 350mm.

Wildland Firefighter Trousers - Gold Proban

The Wildland Firefighter Trousers features reinforced knee areas and an elastic waist with draw cord and metal zip.

Wildland Firefighter Jacket - Gold Proban

The Wildland Firefighter Jacket features a contoured stand-up collar designed for maximum thermal protection, as well as large bellows pockets with Hook and Loop closure and drain holes.

E-Cool Vest - Royal Blue

The E-Cool® Vest has strategically placed E-Cool crystals which keep your upper body cool. The vest has a zip closure and elasticised sides and base to keep it close to ensure a close fit.

E-Cool Vest - High Visibility Fluoro Yellow

The E-Cool® Vest has strategically placed E-Cool crystals which keep your upper body cool. The vest has a zip closure and elasticised sides and base to keep it close to ensure a close fit. Made from 100% polyester fabric.

E-Cool Hard Hat Insert - Navy Blue

E-Cool Bandana - Navy Blue

E-Cool Bandana - Navy Blue Neck Tie

E-Cool Cap - Navy Blue

E-Cool Cap

CHEM-TECH FRAS Chemical Splash Coverall (Standard Hood)

CHEM-TECH® Coverall are made from CHEM-TECH® FRAS (Anti-static flame retarded) fabric, which allows vapour to transfer through the fabric while preventing penetration by a variety of chemicals. CHEM-TECH® Chemical Splash clothing allows your body to "breathe" so your sweat can evaporate, reducing the possibility of heat stress.

CHEM-TECH Chemical Splash Coverall (Standard Hood)

CHEM-TECH® Coverall are made from CHEM-TECH® fabric, which allows vapour to transfer through the fabric while preventing penetration by a variety of chemicals. CHEM-TECH® Chemical Splash clothing allows your body to "breathe" so your sweat can evaporate, reducing the possibility of heat stress.

ONESuit Pressure Test Adapter Kit

The ONESuit® Leak Test Adapter Kit is a set of two adapter hoses that universally interface between most leak test equipment and ONESuit® products.

ONEGlove #174 Hazmat (OEM-Specific Cuff)

ONEGlove®Hazmat revolutionized the protective glove category by combining incredible dexterity with superior protection against cuts and punctures, C/B agents, industrial solvents and chemicals, and flash fires.

ONEGlove #174 Hazmat (Universal Cuff)

ONEGlove® Hazmat revolutionized the protective glove category by combining incredible dexterity with superior protection against cuts and punctures, C/B agents, industrial solvents and chemicals, and flash fires.

ONESuit Pro

ONESuit® Pro is the latest innovation in single-skin hazmat suits from Saint-Gobain Performance Plastics, allowing for maneuverability and user comfort.

ONESuit® Flash

The first single-skin suit certified to protect against chemical flash fires. ONESuit® Flash provides an added level of protection without the need for an uncomfortable overcover.

ONESuit® Shield

ONESuit Shield combines uncompromised protection with exceptional comfort in a Level B configuration. Certified to CBRN First Response and Chemical Splash standards, this lightweight and durable garment provides enhanced mobility for performing the most demanding tasks.

ONESuit Gard

Ultra-light weight design combines superior protection and maximum user comfort. ONESuit® Gard (formerly ONESuit® TEC) was the first ultra-lightweight, single-skin protective garment from Saint-Gobain.

Big Jim Chainsaw Chaps - CXT Style Nylon

Big Jim® CXT Style Nylon Chainsaw Chaps are made with heavy duty black waterproof nylon and are available in three lengths.

Big Jim Chainsaw Chaps - CXT Style Proban

Big Jim® CXT Style Proban Chainsaw Chaps are made with orange Proban flame retardant cotton fabric and are available in three lengths.

Big Jim Chainsaw Trousers

Big Jim® Chainsaw Trousers are made with tough cotton polyester, and feature hand and rear pockets.

Big Jim Chainsaw Chaps - CSC Style Nylon

Big Jim® CSC Style Nylon Chainsaw Chaps are made with heavy duty black waterproof nylon and are available in three lengths.

Big Jim Chainsaw Chaps - CSC Style Proban

Big Jim® CSC Style Proban Chainsaw Chaps are made with orange Proban flame retardant cotton and are available in three lengths.

Big Jim Chainsaw Chaps Belt Extension

Belt and Leg strap extensions for CSC Style Chaps

ArcSafe CARBON X Black Balaclava 23cal/cm2

The ArcSafe CarbonX Arc Flash balaclava is a flame resistant double ply knit, offering supreme protection for the face and neck area. Not only is this balaclava soft and comfortable, it has an arc rating of 23.3 cal/cm and a PPE 2 level (HRC2)

Elliotts Arc Flash Gear Bag - 390W×490H (mm)

Elliotts ArcSafe Elvex ArcShield Kit Bag B229

ArcSafe Arc Shield - Kit 3

Kit 3 includes:

• Face Shield (FS20ARC10) - Molded polycarbonate faceshield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in), providing full wrap protection including a Chin Guard.
• Visor Holder for mounting to various style safety caps
• UniSafe Polycarbonate (Heat) safety helmet
• Protective Eyewear: Pyramex Montego Clear
• CarbonX Balaclava
• Kit Bag

ArcSafe Arc Shield - Kit 2

Kit 2 includes:

• FaceShield (FS20ARC10) - Molded polycarbonate faceshield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in), providing full wrap protection including a Chin Guard.
• Visor Holder for mounting to various style safety caps
• UniSafe Polycarbonate (Heat) safety helmet
• Protective Eyewear: Pyramex Montego Clear

ArcSafe Arc Shield - Kit 1

Kit 1 includes:

• Face Shield (FS20ARC10) - Molded polycarbonate faceshield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in), providing full wrap protection including a Chin Guard.
• Visor Holder for mounting to various style safety caps.

ArcSafe Elvex Arc Shield 13cal/cm2 - Kit 3

Kit 3 includes:

• Face Shield (FS18ARC10) - Molded polycarbonate faceshield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in), providing full wrap protection.
• Visor Holder for mounting to various style safety caps
• UniSafe Polycarbonate (Heat) safety helmet
• Protective Eyewear: Pyramex Montego Clear
• CarbonX Balaclava

ArcSafe Elvex Arc Shield 13cal/cm2 - Kit 2

Kit 2 includes:

• Face Shield (FS20ARC10) - Molded polycarbonate face shield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in), providing full wrap protection.
• Visor Holder for mounting to various style safety caps
• UniSafe Polycarbonate (Heat) safety helmet
• Protective Eyewear: Pyramex Montego Clear

ArcSafe Elvex Arc Shield 13cal/cm2 - Kit 1

Kit 1 includes:

• Face Shield (FS20ARC10) - Molded polycarbonate face shield measuring 250 mm x 470 mm x 2 mm (10 in x 18.5 in x .075 in) providing full wrap protection
• Visor Holder for mounting to various style safety caps